Categories
Contact Us

Tops Timber And Veneers Limited
Add:Suite 810, No. 111 Changjiang Road, Nanjing 210005, China
Tel:+86-25-85438021
Mobile:+86-13951913207
Contact:Hugh Young
E-mail:hugh@topstimber.com
Contact:Xinping Xu
E-mail:xpxu@topstimber.com

Knowledge
Home > Knowledge > Content
How to measure the glue strength of plywood
Mar 28, 2018

  We all know that plywood is a building board that we often use. This board is not cut out of a piece of wood but is glued together with a thin board of wood. People sometimes worry that the plywood produced by plywood manufacturers will have poor glueability and will not crack during use. Here plywood manufacturers will give you how to measure the plywood's glue strength.

  Different types of plywood determination methods are different. For Type 2.1 plywood, it must be cooked in boiling water for four hours and it should be completely immersed in water. It is then dried for 20 hours in an air convection oven placed around 63 degrees Celsius. Then boil it in boiling water for 4 hours, take it out and cool it for 10 minutes, and observe whether there is any gel opening at the plate joint. The method used for Type 2.2 plywood and Type 2.3 plywood is the same, except that the time and drying time in hot water are different. 2.5 plywood is mainly determined by means of a testing machine.

  Mastering the method of measuring plywood can test whether the quality of the plywood you purchased is reliable.

  www.njtopstimber.com

  • Newsletter
  • Categories
  • Contact Us

    Tops Timber And Veneers Limited
    Add:Suite 810, No. 111 Changjiang Road, Nanjing 210005, China
    Tel:+86-25-85438021
    Mobile:+86-13951913207
    Contact:Hugh Young
    E-mail:hugh@topstimber.com
    Contact:Xinping Xu
    E-mail:xpxu@topstimber.com

  • QR Code
  • Copyright © Tops Timber and Veneers Limited All Rights Reserved.