Categories
Contact Us

Tops Timber And Veneers Limited
Add:Suite 810, No. 111 Changjiang Road, Nanjing 210005, China
Tel:+86-25-85438021
Mobile:+86-13951913207
Contact:Hugh Young
E-mail:hugh@topstimber.com
Contact:Xinping Xu
E-mail:xpxu@topstimber.com

Knowledge
Home > Knowledge > Content
Steps of fiber separation
Jan 22, 2018

A: Hot Grinding. The qualified wood chips are transported into the wood storage silo, and the chips are softened and then transported to the grinding chamber. After the heat mill compressed wood chips, the moisture content of the wood chips to squeeze water.

B: Apply Wax. Paraffin wax after the steam coil heating melting, melting paraffin through the pump pipe into the grinding chamber before the chip, separated into fiber, paraffin in the fiber surface distribution is more uniform.

C: Sizing. Urea-formaldehyde resin after the consideration of the device, the pump into the double metering tank, and then into the pump input discharge pipe, the fiber for sizing, the discharge pipe fiber in a high-speed flow state, the glue liquid into a spray-like, evenly sprayed on the fiber surface. Can add curing agent, formaldehyde capture agent and so on to stir the companion.


Previous: What is plywood

Next: No Information

  • Newsletter
  • Categories
  • Contact Us

    Tops Timber And Veneers Limited
    Add:Suite 810, No. 111 Changjiang Road, Nanjing 210005, China
    Tel:+86-25-85438021
    Mobile:+86-13951913207
    Contact:Hugh Young
    E-mail:hugh@topstimber.com
    Contact:Xinping Xu
    E-mail:xpxu@topstimber.com

  • QR Code
  • Copyright © Tops Timber and Veneers Limited All Rights Reserved.